Thursday, March 17, 2016

The ROCK 3.0: CPC International

A few CPC International cars made it to the layout this evening.  Two of the tanks which you saw earlier, plus one formerly Undecorated Delaware Valley 50' Airslide which now has been converted to CPC International.  I have one more of these to decal up as well as a bunch of tank cars.

Looks like a Peoria Terminal Co. local (over powered) making a delivery of empties to
CPC International in Pekin, Illinois.




The ROCK 3.0: Airbrushing Progress

Well, my adventures in airbrushing have been interesting so far.  I purchased the Badger 200NH airbrush.  It worked well for the two or three times I used it.  After a period of non-use, it wouldn't siphon the paint out of the jar anymore.  I could siphon acetone, but even then it was pulsating.  I found out it is a needle bearing most likely as the cause.  I tried replacing this on my own as I found the parts available online.  Nope, this is not a customer-replaceable part.  It needs to be sent off to Badger for repair.  So, that is what I plan on doing tomorrow.

I failed to mention that after the period on non-use, I noticed that the tip of the needle was bent.  I wasn't sure how that happened as I hadn't dropped it.  After a few days, it dawned on me my daughter in passing said (a while back), "Daddy, your airbrush dropped, but it's ok".  I put it back on the shelf.  I confirmed this again with my daughter.  Well, that explains that.  I must have been in post-Sunday afternoon nap mode when she told me, so I didn't think anything else about it.

Meanwhile, I refer to good friends Larry Keller and Allan Heimsoth for advice on airbrushing in general.  One friend mentioned he had numerous airbrushes.  Some are better than others, but generally one would work when the mood struck to actually paint something.  Considering the Badger 200 is not super expensive, I went this route and purchased a second to keep on hand.  I'm glad I did now otherwise I would still be out of commission.

So, back to painting.  It has been a struggle.  Mainly, because I'm making newbie mistakes.  I painted some tank cars without cleaning them thoroughly first.  That created an issue with paint peeling off for a leprosy effect.  Sadness.

I painted three Atlas Kaolin tanks.  Results - All had the leprosy effect.  Those will need to be stripped and repainted.

I painted four (of five I own) Roundhouse previously stripped (purchased that way off eBay) tank cars.  Paint stuck well to those.  Painted the car yellow and the bottom half black.  My black line is pretty sharp except around the ladder region.  I tried fixing this but made it worse on one car.  Instead, I will try to hide it with some weathering.  I hit all cars with gloss coat last night and decaled up two this morning as CPC International tanks.  The tip to apply a gloss coat beforehand decaling eliminated the issue I had before with the shininess of the label.  Thanks everyone for that tip!

So, here are some photos of the tank cars with one side decaled.  I will decal the other side later today.  I have a few more decal sheets on order.  When I'm done, I will have a total of eight CPC International tank cars (5x MDC/Roundhouse, 3x Atlas Kaolin).

I think they turned out pretty darn nice!





Overall, airbrushing has been a learning process.  I will get better over time.  I'm really pleased with how these turned out after adding decals today.

Decals required for this job:
Microscale 60-727 - Corn Products Freight Cars - 40' Tank Car, 3-Bay ACF Hopper
Microscale 60-796 - Tank Cars - Senica, Amstar, CPC International 1970+

Paint:
Tru-Color Rock Island Yellow TCP-261
Tru-Color Flat Black TCP-805